GBP (£)
ShockTec™ Plus Digital Shock Detectors w/ Magnet
RK601SMG300B
ShockTec™ Plus is a digital shock detector with a door/window magnetic contact for internal use that provides reliable 24-hour perimeter protection. A break-in is detected as soon as the intruder attempts to force, smash, drill or even saw through the protected window, door, wall or roof.
ShockTec™ employs an advanced digital microprocessor to analyze the vibration signal received from the electric sensor.
A unique feature of ShockTec™ Plus is digital sampling of the signal simultaneously in two separate channels, each channel amplified at a different gain. This provides an extremely wide dynamic range of the sampled signal, enabling precise measurement and analysis of the shock signal.
The ShockTec™ Plus model has a magnetic reed switch for double protection of shock plus opening of windows or doors, connected to two separate zones in the panel. Any attempt to defeat the detector by using large magnets, as defined by EN-50131-2-6 Security Grade 2 requirements, will cause a tamper.
Features
- Digital Microprocessor with Intelligent Digital
Signal Processing
-
Gross Attack detection
-
Incorporates a door/window magnetic contact for
shock and contact protection (separate zones)
-
Attempts to defeat the contact with large
magnets cause a tamper alarm
-
Intelligent Digital Signal processing –
differentiates between naturally caused vibrations and cuts out frequencies
that cannot be caused by an illegal entry attempt
-
Ideal for windows, doors, walls and roofs
-
Encapsulated bi-morph piezo electric sensor
-
Model name: RK601SM Shocktec™ Plus with Contact
| Current consumption (typical) | 7.5mA | Alarm Time | 2.5 seconds |
|---|---|---|---|
| Enclosure dimensions | 25x28x95mm for the detector, 10x12x58mm for the magnet | Supply voltage | 9V-16V DC |
| Reed relay | 100mA at 24 VDC, NC | Enclosure material | Flame retardant ABS |
| Tamper relay | 500mA at 24VDC, NC | RF immunity | 40 V/m from 80MHz to 1GHz |
| Alarm relay | 100mA at 24VDC, NC, Optorelay | Electrostatic discharge | No false alarms up to 8kV |
| Tri-color LED indicator | Orange-over-sensitive, green: alarm & correct calibration, red: under-sensitive | False alarm protection | Digital microprocessor signal processing and noise reduction with maximum ground plane |
| Sensitivity setting | Dual stage potentiometer | Max No of units on 1st to Latch loop | 10 |
| Maximum humidity | 95% non-condensing | Max No. of units on Any Latch loop | 80 |
| Operational temperature | -20°C to 60°C | Latching modes | Any or first to latch operation modes |
Delivery: Next day delivery is available with DPD, GLS and other couriers. The current cut off time for next day delivery is 1:00pm for DPD and 3:00pm for other couriers.
Returns: KD Electronics will happily refund or exchange any item as long as it is returned in perfect condition suitable for resale or tested by us and found to be faulty. Any goods returned under terms of the guarantee or for repair must be suitably packed and with the nature of the fault and the full name and address of the customer clearly indicated.
All our Trade customers can return any products at our expense by filling out this form.
