GBP (£)
Marmitek MegaView 121
HDMI extender over single CAT5
The Marmitek MegaView 121 enables you to easily extend an HDMI (High Definition Multimedia Interface) signal or DVI (Digital Visual Interface) over one CAT5e/6 cable. The maximum CAT5e/6 cable length is 100 metres at 1080p resolution. Watch TV programmes or films and view photos from, for example, your digital TV decoder, Media Centre PC, Bluray player or hard disk recorder anywhere in the home on your TV/projection screen, in ULTRA HD quality. The MegaView 121 allows you to operate the connected device from another room or through closed cabinet doors using your own remote control.
- Watch TV programmes or films and view photos from, for example, your digital TV decoder, Media Centre PC, Blu-ray player or hard disk recorder anywhere in the home on your TV/projection screen, in ULTRA HD quality.
- Extend your HDMI cable up to 70 metres using one CAT5e/CAT6 cable!
- Supports 4k2k Ultra HD, 1080p Full HD and 3D, without compression!
- Operate your connected A/V equipment remotely, using the infrared return function.
- Supports High Definition LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio.
- Automatically switches to standby mode when you turn off the A/V device or TV.
How it works?
Connect the HDMI source (Blu-ray disc player, TV Decoder, Media Centre PC, etc.) to the MegaView 121 transmitter, using an HDMI cable (not provided). Connect the MegaView 121 receiver to the appliance shown (e.g. HDTV or projector), using an HDMI cable (not provided). Use one CAT5e/6 Ethernet cable to connect the MegaView 121’s transmitter to the receiver. Attention! The MegaView 121 cannot be connected to an existing home network (LAN), this may cause damage to the device. Finaly, connect the power adapter on the ‘DC/5V’ connection on the MegaView 121and plug the adapter into a socket.
Connect the HDMI source (Blu-ray disc player, TV Decoder, Media Centre PC, etc.) to the MegaView 121 transmitter, using an HDMI cable (not provided). Connect the MegaView 121 receiver to the appliance shown (e.g. HDTV or projector), using an HDMI cable (not provided). Use one CAT5e/6 Ethernet cable to connect the MegaView 121’s transmitter to the receiver. Attention! The MegaView 121 cannot be connected to an existing home network (LAN), this may cause damage to the device. Finaly, connect the power adapter on the ‘DC/5V’ connection on the MegaView 121and plug the adapter into a socket.
Delivery: Next day delivery is available with DPD, GLS and other couriers. The current cut off time for next day delivery is 1:00pm for DPD and 3:00pm for other couriers.
Returns: KD Electronics will happily refund or exchange any item as long as it is returned in perfect condition suitable for resale or tested by us and found to be faulty. Any goods returned under terms of the guarantee or for repair must be suitably packed and with the nature of the fault and the full name and address of the customer clearly indicated.
All our Trade customers can return any products at our expense by filling out this form.
