GBP (£)
1 m/3 ft Coaxial 3D-FB Cable
A
coaxial 3D-FB cable is mainly used for radio frequency signal
transmission. The length is 1 m, the working frequency range is 0-6 GHz.
This cable will perfectly suit all HiBoost mobile booster models.
Key features
- Low loss
- Light, flexible and weatherproof
- Low transmission delay
- Minimum attenuation
NOTE: Mind, that too long cable for the booster kit will decrease the signal enhancement power of the system. We highly recommend to consult our Technical managers before a purchase.
General Characteristics
Inner Conductor: BC
Conductor Dia.: 1.12 +/-0.02 mm
Min. Break Strength: 453 N
Insulation Dia.: 2.95 +/-0.15 mm
Centricity: ≥ 85%
Adhesion: 10 to 100N @ 25 mm
Shielding: AL/P-Foil (Bonded)
Foil overlap: ≥ 120 %
Outer Conductor: TC Wire Braid
Coverage: 90 +/-3%
Jacket: FR-PVC
Outer Dia.: 4.95 +/-0.15mm
Mechanical Characteristics
Min. Bending Radius:
Installation: 12.7 mm
Repeated: 50.8 mm
Max. Pulling Tension: 245
Crush resistance of cable (load of 700N): < 1 %
Rated Temperature
Storage/operating temperature: -40~+85℃
Outdoor Installation: -40~+85℃
Electrical Characteristics
Capacitance: 78pF/m
Velocity ratio: 84%
DCR: Inner Conductor : < 17.6 ohm/km
DCR: Outer Conductor : < 16.1 ohm/km
Jacket Sparker: 3000 V RMS
Dielectric Strength: 1000 V DC
Insulation resistance: > 10,000МΩ·km
Peak Power: 2.5 KW
Shielding Effectiveness: >90 dB
VSWR: 30-2500 MHz <1.20
Attenuation (at 20 ℃): dB/100m
30MHz: 5.80
50 MHz: 7.50
150 MHz: 13.10
220 MHz: 15.90
450 MHz: 22.80
900 MHz: 32.60
1500 MHz: 42.40
1800 MHz: 46.60
2000 MHz: 49.30
2500 MHz: 55.40
5800 MHz: 86.50
Maximum attenuation is 10% higher.
Delivery: Next day delivery is available with DPD, GLS and other couriers. The current cut off time for next day delivery is 1:00pm for DPD and 3:00pm for other couriers.
Returns: KD Electronics will happily refund or exchange any item as long as it is returned in perfect condition suitable for resale or tested by us and found to be faulty. Any goods returned under terms of the guarantee or for repair must be suitably packed and with the nature of the fault and the full name and address of the customer clearly indicated.
All our Trade customers can return any products at our expense by filling out this form.
