GBP (£)
15 m/ 50 ft HiBoost200 Cable 3D-FB
Key Features
- 15m/ 50ft length
- Low loss
- Light, flexible and weatherproof
- Low transmission delay
- Minimum attenuation
HiBoost200 is a 50ft/15m low-loss cable with N-Male
connectors on both ends. It is used to transmit radio frequency (RF)
signal and is compatible with all the 50 ohm amplifiers. The cable’s
working frequency range is 0—6GHz.
PLEASE NOTE: If you use a cable, which is longer than the one from your kit, mind that your booster can lose power and provide worse mobile signal amplification. Contact our Professional Tech Team
before buying an additional cable.
Technical Specifications
General Characteristics
Inner Conductor: BC
Conductor Dia.: 1.12 +/-0.02 mm
Min. Break Strength: 453 N
Insulation: Foam P.E
Insulation Dia.: 2.95 +/-0.15 mm
Centricity: ≥ 85%
Adhesion: 10 to 100N @ 25 mm
Shielding: AL/P-Foil (Bonded)
Foil overlap: ≥ 120 %
Insulation Dia.: 2.95 +/-0.15 mm
Centricity: ≥ 85%
Adhesion: 10 to 100N @ 25 mm
Shielding: AL/P-Foil (Bonded)
Foil overlap: ≥ 120 %
Outer Conductor: TC Wire Braid
Coverage: 90 +/-3%
Jacket: FR-PVC
Outer Dia.: 4.95 +/-0.15mm
Mechanical Characteristics
Min. Bending Radius:
Installation: 12.7 mm
Repeated: 50.8 mm
Max. Pulling Tension: 245
Crush resistance of cable (load of 700N): < 1 %
Rated Temperature
Storage/operating temperature: -40~+85℃
Outdoor Installation: -40~+85℃
Electrical Characteristics
Impedance: 50± 2 ohm
Capacitance: 78pF/m
Velocity ratio: 84%
DCR: Inner Conductor : < 17.6 ohm/km
DCR: Outer Conductor : < 16.1 ohm/km
Jacket Sparker: 3000 V RMS
Dielectric Strength: 1000 V DC
Insulation resistance: > 10,000МΩ·km
Peak Power: 2.5 KW
Shielding Effectiveness: >90 dB
VSWR: 30-2500 MHz <1.20
Attenuation (at 20 ℃): dB/100m
30MHz: 5.80
50 MHz: 7.50
150 MHz: 13.10
220 MHz: 15.90
450 MHz: 22.80
900 MHz: 32.60
1500 MHz: 42.40
1800 MHz: 46.60
2000 MHz: 49.30
2500 MHz: 55.40
5800 MHz: 86.50
Capacitance: 78pF/m
Velocity ratio: 84%
DCR: Inner Conductor : < 17.6 ohm/km
DCR: Outer Conductor : < 16.1 ohm/km
Jacket Sparker: 3000 V RMS
Dielectric Strength: 1000 V DC
Insulation resistance: > 10,000МΩ·km
Peak Power: 2.5 KW
Shielding Effectiveness: >90 dB
VSWR: 30-2500 MHz <1.20
Attenuation (at 20 ℃): dB/100m
30MHz: 5.80
50 MHz: 7.50
150 MHz: 13.10
220 MHz: 15.90
450 MHz: 22.80
900 MHz: 32.60
1500 MHz: 42.40
1800 MHz: 46.60
2000 MHz: 49.30
2500 MHz: 55.40
5800 MHz: 86.50
Maximum attenuation is 10% higher.
Delivery: Next day delivery is available with DPD, GLS and other couriers. The current cut off time for next day delivery is 1:00pm for DPD and 3:00pm for other couriers.
Returns: KD Electronics will happily refund or exchange any item as long as it is returned in perfect condition suitable for resale or tested by us and found to be faulty. Any goods returned under terms of the guarantee or for repair must be suitably packed and with the nature of the fault and the full name and address of the customer clearly indicated.
All our Trade customers can return any products at our expense by filling out this form.
